Author Archives: Josh Gardner

  1. Inverters

    Leave a Comment

    Inverters play a critical role in equipment sustainability and energy cost-savings for commercial and industrial applications. They are an essential part of electrical systems because you can easily adjust the frequency of the voltage supplied to your motors. This is extremely important when demand changes and you need a reliable system to help regulate needed adjustments.


    Inverters Control AC Power Frequency and Voltage

    An inverter can freely adjust and modify the speed and torque of an electric motor.

    They convert input AC power to DC power and then create AC power from the converted DC power using pulse width modulation (PWM) control.

    It enables them to emit a pulsed voltage that is smoothed by the motor coil so that a sine wave current travels to the motor, allowing the motor inverter to control the speed and torque.

    Control Modes of Inverters

    • V/f Control. V/f control is a method of motor control in which the voltage and frequency are proportional. It is also called the V/f characteristics. The motor speed is directly proportional to the applied voltage and frequency.
    • Vector Control. Vector control, also known as field-oriented control (FOC), is a control mode for variable-frequency drives (VFDs). A three-phase AC electric motor’s stator currents are identified as two orthogonal components displayed as a vector.

    One component is directly proportional to torque, while the other is proportional to flux. Torque and change are measured in motor windings and used by the motor controller to produce the correct motor torque and flux.

    • Sensorless Vector Control. Sensorless vector control is a variation of vector control that does not require feedback from an encoder. The inverter uses the motor’s current and voltage output to correct the waveform. It results in finer speed control.
    • Vector Control with Encoder Feedback. Vector control with encoder feedback is a vector control variation that uses an encoder’s feedback. The encoder adjusts the output waveform and improves speed control.

    Best Inverter Control Mode

    The best inverter control mode for your application depends on several factors, including:

    • The type of motor you are using
    • The speed control range you need
    • The level of precision you require
    • The amount of torque you need
    • If you need the ability to reverse the motor’s direction

    Benefits of Inverters

    • Energy-saving. An inverter AC motor drive is a key technology for reducing energy consumption in fan and pump applications. Inverter drives can reduce energy consumption by 20 to 50 percent compared to traditional on/off control or damper control methods by controlling motor rotation.
    • Precision speed control. Inverters can precisely control motor speed, making them ideal for applications that require slow speeds or frequent starts and stops.
    • Smooth acceleration and deceleration. An inverter motor drive can ramp up or down the speed of the motor smoothly and gradually, which is critical for applications such as escalators and conveyor belts to avoid dropouts of loads.
    • Improved process control. Because inverter drives can precisely control motor speed, they can also improve process control in packaging and materials handling applications.
    • Longer motor life. Inverter drives can extend the life of motors by reducing mechanical stress on the engine and bearings.
    • Reduced maintenance costs. The extended motor life and improved process control of inverter drives can lead to reduced maintenance costs.
    • Operator comfort. Inverter drives can help reduce noise and vibration in applications such as fans and pumps, which improves operator comfort.

    Efficient and precise way to control your motor

    Gainesville Industrial Electric Co has the perfect solution for you if you’re looking for a more efficient and precise way to control your motor. From energy-saving vector control to sensorless vector control.

    We have various options to choose from that will perfectly suit your needs. Contact us today to learn more! We’ll be happy to answer any questions you have and help you find the perfect inverter for your business.

  2. Gear Reducers

    Leave a Comment

    Gear reducers are essential in many mechanical systems and can be found in everything from manufacturing plants to automotive engines. It can be used in many applications and industries, including machines with heavy or repetitive loads.

    Gainesville Industrial Electric Co. offers a wide selection of quality gear reducers to help you get the most out of your machines and motors. We’ll go through the advantages of using one and the many available types. We’ll also advise on choosing the best gear reduction for your needs.

    Gear Reducers

    What is a gear reducer and what are its purposes

    According to Market Prospects, industrial machines need a gear reducer to change the speed and power of the device. This is so it can meet the needs of different applications.  The reducer also helps to keep the machine running smoothly and efficiently.

    A gear reducer is a type of mechanical device that is used to change the speed and torque of a machine. The device consists of two or more gears that are connected. The gear reducer’s size and capacity must match the application’s specific requirements.

    There are several types of gear reducers, but the most common ones are helical, bevel, and worm. Helical gear reducers are the most popular type. They have a high-efficiency rating and low noise level. Bevel gear reducer is used in applications where space is limited. Worm gear reducer is used in heavy-duty applications.

    Advantages of gear reducers

    Some of the advantages of gear reducers include:

    • Increased Efficiency: One of the main benefits of using a gear reducer is that it can help increase the efficiency of a machine. When the speed and torque of a device are lowered, less energy is required to run it. This reduces operating expenses while also enhancing performance.
    • Improved Safety: Another advantage of gear reducers is that they can improve safety. When used properly, they can help to prevent accidents and injuries.
    • Extended Service Life: Gear reducers can help extend a machine’s service life. Reducing the speed and torque reduces wear and tear on the engine. This results in fewer repairs and more extended periods of operation between maintenance intervals.

    Applications of gear reducers in various industries

    Gear reducers are used in multiple industries, including food processing, manufacturing, mining, and construction. Below are some examples of how they are used:

    • In the food industry, gear reducers are used in conveyor systems to move food products from one location to another.
    • In manufacturing, gear reducers are used in assembly lines to move parts and components from one station to another.
    • In mining, gear reducers are used in conveyor systems to transport materials from the mine site to the surface.
    • In construction, gear reducers are used in cranes and hoists to lift heavy loads.

    How to choose the right gear reducer for your needs

    When selecting an electric gear reducer, it is essential to consider the application’s specific needs. The type of gear reducer, size, and capacity must match the machine’s requirements. The working environment will also influence the gear reducer’s material and construction.

    For example, stainless steel or other corrosion-resistant materials must be made in wet or corrosive environments. Selecting a gear reducer with the proper efficiency rating and low noise level is also essential.

    Maintenance and troubleshooting tips for gear reducers

    To keep a gear reducer running smoothly, it is vital to perform regular maintenance and troubleshoot any issues that may arise.

    Some tips for maintaining a gear reducer include:

    • Check the level of lubricant regularly and replenish it as needed.
    • Inspect the gears regularly for wear or damage.
    • Check the bearings and seals for wear or damage.
    • Clean the unit regularly to prevent the build-up of dirt and debris.

    Here are some guidelines for resolving electric gear reducer issues:

    • If the unit is making noise, check for loose parts or excessive build-up of dirt and debris.
    • If the unit is vibrating, check for misalignment or wear.
    • If the unit is not operating correctly, check the lubricant level, type, and speed and torque settings.

    Machine Design notes that when oil and grease lose their lubricating qualities, wear of the reducer soon follows.  Check the oil level monthly and change it according to the manufacturer’s schedule. Also, keep an eye out for metal filings in the bottom of the housing; they indicate abrasive wear.

    These reducers are an essential part of many industrial machines and applications. You can ensure that they will provide years of reliable service by understanding how they work and how to maintain them properly.

    Gear reducers provide the torque and speed you need to get the job done

    If you require an electric motor reduction gearbox, Gainesville Industrial Electric Co. can help. We offer a wide variety of gear reducers to meet the needs of your application. Contact us today to discover more about our products and services. Gear up for success with Gainesville Industrial Electric Co.

  3. Farm Duty Electric Motor

    Leave a Comment

    Farm duty electric motors are designed for use in agricultural applications. They are typically single-phase motors with a high torque design. They are suitable for various agricultural applications, including pumps, fans, compressors, conveyors, and other machinery. 

    These farm duty electric motors apply to farm use and can be used in other industries, such as the food industry. 


    How Does It Work? 

    The electric motor converts electrical energy into mechanical energy, consisting of a stator and a rotor. The stator is the stationary part of the electric motor, while the rotor is the rotating part. 

    The electric motor works by using electromagnetism. The magnetic field was created by the stator that has coils of wire. The rotor has permanent magnets attracted to the stator’s magnetic field. This interaction between the stator and rotor creates torque, which causes the rotor to spin. 

    By changing the number of coils in the stator, the electric motor‘s speed is controlled magnetic field or by changing the strength of the magnets in the rotor. 

    Different types of Farm Duty Electric Motors 

    Here is a list of common farm duty motors, each with specific use and features. 

    • General Purpose Motors: These electric motors are designed for use in a variety of applications. These motors are versatile and can be used for various purposes. 
    • Pump Motors: Designed for use with pumps. They are typically single-phase motors with a high starting torque. Pump motors can be used for a variety of agricultural and industrial applications. 
    • Fan Motors: Fan motors are designed for use with fans. They provide high levels of torque and are applicable in various agricultural, industrial, and residential applications. 
    • Compressor Motors: Compressor motors are designed for use with compressors. They are typically single-phase motors with a high starting torque. Compressor motors can be used in a variety of agricultural and industrial applications. 
    • Conveyor Motors: Conveyor motors are designed for use with conveyors. They provide high levels of torque and can be used in various applications, including agricultural, industrial, and material handling applications. 

    Applications of Farm Duty Electric Motors in the food industry 

    Farm duty electric motors have long been utilized in the food industry for various tasks, from powering farm equipment to processing and packaging foods. 

    The food industry relies on efficient and reliable machinery to process and transport products. Farm duty electric motors are commonly used in various applications, such as 

    • powering conveyor belts 
    • processing equipment 
    • packaging machines. 

    In addition, farm duty motors often feature built-in thermal protection and can operate at high ambient temperatures without jeopardizing performance. It makes them ideal for outdoor use on farms and in food processing facilities where high heat is often an issue. Farm duty electric motors offer exceptional energy efficiency and can significantly reduce operating costs for food industry businesses. 

    These motors are tough and built to last 

    Farm Duty Electric Motors are the perfect option for the farm and other industries such as the food industry. They are durable, cost-efficient, and can handle a variety of tasks. If you are looking for a motor that will stand up to the demands of your business, a farm duty electric motor is the way to go. 

    Not sure which farm duty electric motor is suitable for you? Contact Gainesville Industrial today, and our experts will help you find the perfect motor for your needs. 

  4. Stainless Steel Motors for Food & Beverages Application

    Leave a Comment

    In the food and beverage industry, stainless steel electric motors are key to ensuring reliable and clean operations. In caustic cleaning environments, stainless steel motors provide the durability and corrosion resistance needed to withstand harsh conditions. 

    For applications where hygiene is of utmost importance, stainless steel electric motors are easy to clean and maintain. Their smooth surfaces prevent the build-up of dirt and debris, making them ideal for use in food processing facilities. 

    With its robust construction and long-term reliability, the food-safe stainless steel motor is an excellent choice for demanding food and beverage applications. When selecting a stainless steel motor for your application, consider the specific needs of your facility to ensure the best possible performance.


    How do stainless steel motors ensure food safety? 

    Food safety is of the utmost importance in the food and beverage business. Materials resistant to germs and other impurities must be used to ensure a safe working environment. 

    Stainless steel motors are comprised of materials that are naturally resistant to germs and other impurities. Their flat surfaces repel dirt and debris, making them simple to clean and disinfect. 

    They also withstand high temperatures and pressures, which is ideal for food processing applications. Consider the specific needs of your facility when selecting a stainless steel motor for your application to attain the best potential performance. 

    Benefits of stainless steel motors 

    Stainless steel motors are a popular choice for many industries, but they are particularly advantageous in the food and beverage industry for the following reasons: 

    • The stainless steel construction not only provides durability and vibration resistance. 
    • It also ensures easy cleaning and sanitation. 
    • Stainless steel motors have excellent corrosion resistance, ensuring they can withstand harsh environments and cleaning chemicals. 

    These features make stainless steel motors a top choice for machines handling food products or sanitary processing facilities. Overall, stainless steel motors provide a robust and reliable option for the food and beverage industry. 

    Factors to consider when using stainless steel motors for food and beverage operations 

    To get the most out of your stainless steel motor, consider the following: 

    • Size: To ensure optimal performance, select a stainless steel motor that is the right size for your application. 
    • Power: Make sure your stainless steel motor has the power to meet your application’s demands. 
    • Speed: Choose a stainless steel motor with the appropriate speed for your needs. 
    • Mounting: Consider the type of mounting that will best suit your application. 

    High-quality stainless steel motors for the food and beverage industry  

    Having reliable equipment is crucial when running a successful business in the food and beverage industry. Many in the industry turn to stainless steel motors for their operation needs. 

    Stainless steel motors are highly durable and able to withstand constant use, but they are also resistant to rust and corrosion due to their protective outer layer. It means less downtime and maintenance for your business and the peace of mind that your equipment will last for years to come. 

    Gainesville Industrial Electric offers a wide selection of motors to meet the specific needs of your application. Contact us today to learn more about our products and how we can help you find the perfect motor for your needs. 

  5. Crusher Duty Motors | Rock Crusher – Features & Applications

    Leave a Comment

    Rock crushers are essential tools that facilitate daily operation in quarries. Based on their demanding work, their motors are built to meet the demands of the motor crushers. These motors are designed for high-belted loads for rock crushers and chipper applications. They also help drive production, ensure minimal downtime, and drive profit through their usage.

    Anyone involved in rock crushing, whether a manager or an operator, should understand the features and applications of their motors. Here’s what you should know about them.

    Crusher Duty Motors Rock Crusher - Features & Applications

    An Overview of Severe Duty/ Crusher Duty Motors

    Crusher duty motors are improved versions of standard enclosed fan-cooled motors. Since they are made for harsh industrial environments, they must be able to sustain a high-demand duty cycle, reliable protection from moisture and contamination, and vibration resistance. They’re also made to meet IEEE-841 standards.

    These motors should produce a quality performance that outlasts other totally-enclosed fan-cooled (TEFC) motors. They also have several features to protect them from exposure to sawdust, ash, and other airborne particles. Most of them also have a three-year warranty compared to the 1-year warranty for the standard models.

    When compared to standard motors, severe duty motor compares in the following ways:

    • Junction box: Standard TEFC motors have a steel or die-cast aluminum casing, while severe duty motors have a cast iron casing.
    • Fan Cover: Standard TEFC motors have a plastic fan cover, while heavy-duty motors use cast iron.
    • Lead seal gasket: Standard TEFC motors use O rings or V rings, while severe duty motors use Neoprene boots.
    • Bearing Inner Cap: Standard TEFC motors don’t have an inner bearing cap, but severe duty motors use cast iron as their inner bearing cap.
    • Vibration: Standard TEFC motors have a vibration rating of 0.15 IPS, while severe duty motors have an IPS rating of 0.008.
    • Nameplate: Standard TEFC motors have an aluminum nameplate, while severe duty uses a stainless steel nameplate.

    Common Industrial Applications 

    Severe-duty motors are used in various heavy-duty industrial applications. This includes:

    • Above ground mining
    • Aggregate and cement
    • Mining
    • Bulk material handling
    • Logging

    Specific above-ground mining machines that use severe-duty motors include:

    • Bucket-wheel excavator
    • Blasthole drills
    • Dragline excavator
    • Dozers
    • Highwall miners
    • Wheel tractor scrapers

    When it comes to aggregate and cement, the following machines use severe-duty motors:

    • Impactor
    • Hammer mills
    • Cage mills
    • Roll crushers
    • Gyratory crushers
    • Jaw crushers
    • Inclined conveyors
    • Dual-drive stackers
    • Washers
    • Rock crushers

    Equipment that uses heavy-duty motors in bulk material handling includes:

    • Bucket elevators
    • Vibratory feeders
    • Weight batching system
    • Vibratory screeners
    • Blowers
    • Mixers and blenders

    Finally, some of the machines that use heavy-duty motors in the logging industry include the following:

    • Skidders
    • Feller bunchers
    • Knuckleboom log loaders
    • Wood chippers
    • Forestry mulchers
    • Swing machines

    Crusher Duty Motor Features

    At Gainesville Industrial Electric, our crusher duty motors have the following features:

    • High-strength oversized shaft
    • High starting torque
    • Full load ampere or FLA of NP:50.6 amp to 455 amps
    • High breakdown torque
    • Energy saving design
    • Premium efficiency
    • Service factor 1.15
    • 460 volts
    • Suitable for harsh applications that require motors that guarantee longer life
    • Use of a total enclosed cooling fan

    Contact our Experts for Your Severe Duty Motor Needs

    Severe duty motors are best suited for machines in harsh industrial applications. They have all the features needed to sustain the requirements for rugged industrial applications. At Gainesville Industrial Electrical, we supply, distribute, and repair electrical motors for all heavy-duty industrial applications. Our experienced staff is dedicated to finding a suitable motor for our customers.

    Contact us today for more information about our severe duty motors or request a quote.